SoundLabs.in
Home Email Email
Swar Sudha
Electronic Shruti Box, Metronome & Tuner
Instruction Manual
1. Plug in the mains cord; two pin male socket into your AC power supply & female socket in the appropriate Male socket of the instrument depending on power supply source. (i.e. 220V or 110 V)
Note: Add-on flat two pin AC converters available.
Caution: Plugging in the 220V power source in the 110V socket of the machine will Seriously Damage the instrument. This action also Voids the Warranty Cover.

2. Switch On Swar Sudha using the Volume On / Off knob.

3. Select your required Sur / Swar (Note) using the Up & Down Buttons. They help you navigate between the Lowest & the Highest Sur / Swar (i.e. Main Notes).
Note: The corresponding LED of the Selected Sur /Swar glows when selected.

4. The Sur / Swar (Main Note) indication is arranged like Harmonium/Piano Keyboards for quick reference. The Carnatic and Western equivalent is printed on the display.
Note: The First LED indicates ' Safed 1 = C = 1 Kattai ' (Lowest Sur) and the Last LED indicates ' Safed 7 = B = 7 Kattai ' (Highest Sur).

5. To further Fine Tune Electronic Shruti Petti press the Fine Tune Button. Pressing the same will illuminate both the UP & Down Fine Tune LED. Using the Up or Down switch navigate until the required Sur / Swar is heard.
Note: Fine Tune allows selection in-between 2 main notes ( i.e. In-Between C & C# by pressing Up Switch and In-Between C & B by pressing Down Switch. The same is indicated by the glowing of the Fine Tune UP Arrow or Fine Tune DOWN Arrow LED.

6. The Select switch help you in the selection of either PA, MA, only SA or Tuner, on a rotational basis.
Note: The corresponding LED of the PA, MA will glow and when only SA or Tuner is selected NO LED will glow.

7. Start the Metronome using the Metronome Switch. Use the Up or Down switch to adjust the Tempo.
Note: When Metronome is on the Sur / Swar cannot be changed.


BATTERY OPERATIONS

1. Open the Battery box at the back of the instrument to insert 8 Pencil Cells (AA) (1.5V each).
Note: While Inserting Observe the ( + - ) marking of the Pencil Cells.

2. Switch On Swar Sudha using the Volume On / Off knob.

Use the instrument as explained before.